Storage method of industrial high temperature resistant adhesive tape

The tape should be stored in a warehouse to avoid exposure to sunlight and rain. It is prohibited to come into contact with acid, alkali, oil and organic solvents. It should be kept clean and dry, 1m away from the discovery device, and the room temperature should be between -15℃ and 40℃. The conveyor roller diameter of the conveyor and the minimum pulley diameter of the conveyor belt should comply with relevant regulations. Polyimide tapes of different types, specifications, strengths, and numbers of layers must not be connected (grouped) and used together. The type and specification of anti-static tape should be reasonably selected according to application needs and specific conditions. It is best to use a crane when loading and unloading the conveyor belt, and use a rigging with a crossbeam to lift it steadily to avoid damaging the belt edge.

1. The tape should be stored in the warehouse to avoid sun and rain; it is forbidden to contact with acid, alkali, oil and organic solvents, keep it clean and dry, 1m away from the discovery device, and the room temperature is between -15℃ and 40℃.

2. The conveyor roller diameter of the conveyor and the minimum pulley diameter of the conveyor belt should comply with relevant regulations.

3. Polyimide tapes of different varieties, specifications, strengths and layers should not be connected (grouped) and used together.

4. The type and specification of anti-static tape should be reasonably selected according to the application needs and specific conditions.

5. It is best to use a crane when loading and unloading the conveyor belt, and use a rigging with a crossbeam to lift it steadily to avoid damaging the belt edge. Do not load and unload it arbitrarily, causing loose rolls and sleeves.

6. The conveyor belt joints are best to use hot vulcanization bonding to improve reliability and maintain high effective strength.

7. The gold finger tape should be placed in a roll, not folded, and should be turned over once a quarter if the storage time is too long.

8. Cleanliness is the basic condition for the good operation of the gold finger tape. Foreign matter will affect the eccentricity of the belt, tension difference, and even breakage.

9. When the conveyor is equipped with baffles and cleaning devices, the wear of the polyimide tape should be avoided.

10. Do not let the polyimide tape snake or creep. Keep the drag roller and vertical roller sensitive and the tension should be moderate.

11. When the polyimide tape is found to have early damage during use, the cause should be found and repaired in time to avoid adverse consequences.